Celebrating In 2012, Our 24th Anniversary
Manufacturing Timing Products!
USA
and Canada
Toll Free 1- 877- 84 SPEED (77333)
International Phone Number
613-353-1911
R. U. Ready Electronics Ltd.
Introduces
Western Barrel Racing Timer/
Now
you can have a 100% Portable Western Barrel Racing Timer / Equestrian Clock
that
runs on standard 9 Volt DC batteries
and
costs many Dollars less that Timers found at events.
Standard Version
Pro Version
Features;
Portable,
take it anywhere for practice.
Runs
on only two 9 Volt Alkaline Batteries one in the Display and one in the
Transmitter
(Optional 9/110 Volt Power Supply to attached to Display and Beam if
power is available.
Set
the Transmitter and Receiver with a gate of 3 Feet (1 Meter) to 150 Feet (45
Meters)
Easy
to setup and align
Time
can easily be seen from 50-75 Feet (15 Meters to 25 Meters) away.
Can
be mounted on standard camera tripods
R. U. Ready Electronics introduces an
Infra Red Beam to work in conjunction with our proven
The following are the
features and uses of the Beam.
The Beam consists of two parts, the
Receiver and Wireless Transmitter.
The Transmitter sends a narrow
invisible Infra Red Beam to the Receiver on a continuous bases. Any
interruption of the Beam between the Transmitter and Receiver sends a code to
the Display that can be used to start or stop the Display program. The Receiver
is plugged into the RJ9 Connector on the bottom of the Display with the
15-Meter (50 Feet) cable included. The remote transmitter is a wireless
connection between the transmitter and receiver. Both the transmitter and
receiver have standard tripod screw mounts for attachment to photo style
tripods and both use individual 9 VDC alkaline batteries. The Receiver shares
the power of the Display and can also be used in conjunction with the 110 Volt
AC adapter.
Alignment between the Transmitter and Receiver is accomplished by first turning on the Transmitter and positioning it in a location from 1 to 45 Meters (3 to 150 Feet) from the Receiver. Plug the Beam into the RJ9 Connector located on the bottom of the Display and turn the main switch on the Display, to on. Point the Receiver at the Transmitter, when alignment is correct a red LED on the back of the Receiver will turn on solid indicating alignment.
No further setup is required.
Stand alone Display with one Beam and
the same entrance and exit for the event.
With the receiver and transmitter turned on and aligned as above. The Display will cycle, first displaying "rdy" on the Display and then "0.000". Passing between the Transmitter and Receiver will start the clock running. Passing through the Transmitter and Receiver will stop the clock running.
Write down your Time, wait 3 Seconds or longer and you are ready for the next Competitor.
Display with two Beams with different
entrances and exits for the event.
Plug the optional Y Connector into the Display and then the start Beam into one side of the Y Connector. Layout the required length of optional cable to the finish location and plug the cable into the second outlet on the Y connector and the back of the remote receiver. Turn the main switch of the Display to on. Point the Receiver at the Transmitter, when alignment is correct a red LED on the back of the Receiver will turn on solid, indicating alignment. Align the remote Beam in the same manner.
No further setup is required.
Note: An optional Manual Start or Stop switch
can be substituted for either the start or stop location.
Specification Beam (Transmitter and Receiver)
Specification Six (6) Digit Display (Pro Version)
Return to: