R.U.Ready Electronics Ltd. P.O. Box 22105 Cataraqui, Kingston Ontario K7M 8S5
Sport-Timer 3000 Wireless Sport Timer
with Optional Wireless Beam(s) and Wireless Displays
Now you can have a 100% Portable Sport-Timer / Track and Field/ Western Barrel Racing / Equestrian Clock that runs on standard 9 Volt DC batteries and costs many Dollars less than Timers found at events. This economical systems allows you to start with the Sport-Timer 3000 Wireless Controller and add one or more Wireless Beams (Transmitters and Wireless Receivers) and add any number of Displays as needed in the future.
You can add additional Beams if Start and Finish Gates are in different locations or if you would like to do Splits around the corners or while doing sprints.
Sport-Timer 3000 Wireless Timing System
Now with all the features you expect.
We have combined our Sport-Timer and Barrel Racing Software into one compact Controller.
Buy a Sport-Timer Controller and get all of the features which you can use for your particular event or any number of different events.
Count Up or Down event clock from 0 seconds to 10 hours or 10 hours to 0 seconds programmable in full seconds or parts of seconds.
Total control over Start and Stop Signals.
Read out on the Sport-Timer Screen to 1000's of a Second.
Programmable up to 100 Laps and Splits
Stores the last 100 Events for Recall
Wireless operation of One or More Sets of remote Beams for Start, Intermediate, and Finish Gates, ideal for Track and Field Training or Western Barrel Racing.
Programmable for Circuit Training or Workouts with signals.
Ability to Transmit to one or more of our 4 and 6 Digit Display.
and runs on 9 Volt DC Batteries available anywhere.
The Sport-Timer 3000 Controller the heart of the System uses four simple controls and can run most events hands free.
Sport-Timer 3000 shown with a single set of Beam.
Sport-Timer 3000 shown with a single Beam and 4 Digit Remote Display.
Sport-Timer 3000 shown with a single Beam and 6 Digit Remote Display.
Specifications: Sport-Timer 3000 /Barrel Racing/Equestrian Wireless Controller
Accurate to 1000's of a second.
Outside dimensions - 4 1/2 " x 2 3/4" x 1" (114mm x 70 mm x 25mm)
LCD Area - 1 1/2 " x 1/2 " (38mm x 13mm) (See Controller Display Example)
Weight - 5.3 Oz (150 Grams) with 9 Volt Alkaline DC Battery Installed
Power: Standard 9 Volt Alkaline DC Battery
Operation range: 10F-105F / -10C to 40C
Receives Signals from the Wireless Receivers
Transmits it's time to any number of Four (4) or Six (6) Digit Displays Wireless.
In addition the Controller has a count down feature and start and stop signals if required.
Signals are not recommended around animals
Belt Clip.
Optional Nylon Carry Case available for Controller.
Accurate to 1000's of a second.
Outside dimensions - 4 1/2 " x 2 3/4" x 1" (114mm x 70 mm x 25mm)
LCD Area - 1 1/2 " x 1/2 " (38mm x 13mm) (See Controller Display Example)
Weight - 5.3 Oz (150 Grams) with 9 Volt Alkaline DC Battery Installed
Power: Standard 9 Volt Alkaline DC Battery
Operation range: 10F-105F / -10C to 40C
Receives Signals from the Wireless Receivers
Transmits it's time to any number of Four (4) or Six (6) Digit Displays Wireless.
In addition the Controller has a count down feature and start and stop signals if required.
Signals are not recommended around animals
Belt Clip.
Optional Nylon Carry Case available for Controller.
The Transmitter sends a narrow invisible Infra Red Beam to the Receiver on a continuous bases. Any interruption of the Beam between the Transmitter and Receiver sends a code to the Controller that can be used to start or stop the program. The remote Transmitter is a wireless connection between the Transmitter and Receiver. Both the Transmitter and Receiver have standard tripod screw mounts for attachment to photo style tripods and both use individual 9 VDC Alkaline batteries.
Alignment between the Transmitter and Receiver is accomplished by first turning on the Transmitter and positioning it in a location from 6 to 100 Feet (2 to 30 Meters) from the Receiver. Turn the Receiver on and point the Receiver at the Transmitter, when alignment is correct a red LED on the back of the Receiver will turn on solid indicating alignment.
Passing through the Beam will start and stop the Controller Wireless and record your time.
Specifications: Beam (Transmitter and Wireless Receiver)
Receiver Signals the Controller to Start and Stop Wireless and records runs when an object breaks its Beam.
Receiver can transmit stop and start signal for several hundred feet to the Controller
Two Beams can be used for Start and Stop gates
Accurate to 1000's of a second
Outside dimensions Receiver - 6 " x 2 3/4" x 1 1/4 " (152 mm x 950 mm x 320 mm)
Receiver Weight -4 oz (115 Grams)
Power Receiver : Standard 9 volt Alkaline DC battery
Outside dimensions Transmitter - 5 1/4 " x 2 1/8 " x 1" (530mm x 550 mm x 250 mm)
Transmitter Weight - 3 oz (85 Grams)
Power Transmitter : Standard 9 volt Alkaline DC battery
Distance between Receiver and Transmitter 6-100 feet (2-30 meters)
Operation Temperature Range: 10F-105F / -10C to 40C
Can be mounted on a standard camera tripods or light stands (not included)
Hockey, Football and Basket Ball Game Clock - Western Barrel Racing and Equestrian Baseball Training - Track and Field Events - Autocross - Gymkhans Auto and Motorcycle - Gymkhana - Cross Country Skiing - Mounted Archery
BMX Bicycle Events - Dog Agility - ATV Bog Racing - Curling Stone Timing
BMX Bicycle Events - Dog Agility - ATV Bog Racing - Curling Stone Timing
Some events that our Sport-Timer Controllers have been used for:
Sport-Timer 3000 Controller Display Example
Controller Set to Start, with Beams Turned On and Aligned
Controller Screen Stopped at 18.941 Seconds (Beam On)
Controller Stopped at 24.898 Seconds (Beam On)
The Optional Large Displays are not necessary to run your event using the Sport-Timer 3000 Wireless Controller and Beam but add the ability to display your times to spectators when transmitted from the Controller. The Controller will transmit to any number of Displays placed around the event within range.
Large Displays
Optional Four (4) Digit Wireless Display (Standard Display) Specification:
Receives the Start and Stop signal from the Controller.
Accurate to 1000's of a second when using a Four (4) Digit Display
Displays time in 100's (See above pictures)
Outside dimensions - 14 1/2 " x 6 3/4" x 1 5/8" (368mm x 171mm x 42mm)
LCD Area - 13" x 4 5/8 " (330mm x 119mm) LCD Area - 13" x 4 5/8 " (330mm x 119mm)
Large LCD numbers - 4" tall by 2" wide (100 mm x 50mm)
Weight - 2 1/2 pounds (1.05K)
Power: Standard 9 volt Alkaline DC battery or Optional 110V power supply.
Operation range: 10F-105F / -10C to 40C
Time visible up to 75 feet (25 meters) away
Can be mounted on a standard camera tripod (not included).
Receives the Start and Stop signal from the Controller.
Accurate to 1000's of a second when using a Four (4) Digit Display
Displays time in 100's (See above pictures)
Outside dimensions - 14 1/2 " x 6 3/4" x 1 5/8" (368mm x 171mm x 42mm)
LCD Area - 13" x 4 5/8 " (330mm x 119mm) LCD Area - 13" x 4 5/8 " (330mm x 119mm)
Large LCD numbers - 4" tall by 2" wide (100 mm x 50mm)
Weight - 2 1/2 pounds (1.05K)
Power: Standard 9 volt Alkaline DC battery or Optional 110V power supply.
Operation range: 10F-105F / -10C to 40C
Time visible up to 75 feet (25 meters) away
Can be mounted on a standard camera tripod (not included).
Optional Six (6) Digit Wireless Display (Pro Version) Specification:
Receives the Start and Stop signal from the Controller.
Accurate to 1000's of a second when using a Six (6) Digit Display (Pro Version)
Displays time in 1000's (see above pictures)
Outside dimensions - 21 " x 6 3/4" x 1 5/8" (530mm x 171mm x 42mm)
LCD Area - 19" x 4 5/8 " (430 mm x 119mm) LCD Area - 13" x 4 5/8 " (330mm x 119mm)
Large LCD numbers - 4" tall by 2" wide (100mm x 50mm)
Weight - 3 1/2 pounds (1.50 K)
Power: Standard 9 volt Alkaline DC battery or Optional 110V power supply.
Operation range: 10F-105F / -10C to 40C
Time visible up to 75 feet (25 meters) away
Can be mounted on a standard camera tripod (not included).
Receives the Start and Stop signal from the Controller.
Accurate to 1000's of a second when using a Six (6) Digit Display (Pro Version)
Displays time in 1000's (see above pictures)
Outside dimensions - 21 " x 6 3/4" x 1 5/8" (530mm x 171mm x 42mm)
LCD Area - 19" x 4 5/8 " (430 mm x 119mm) LCD Area - 13" x 4 5/8 " (330mm x 119mm)
Large LCD numbers - 4" tall by 2" wide (100mm x 50mm)
Weight - 3 1/2 pounds (1.50 K)
Power: Standard 9 volt Alkaline DC battery or Optional 110V power supply.
Operation range: 10F-105F / -10C to 40C
Time visible up to 75 feet (25 meters) away
Can be mounted on a standard camera tripod (not included).
Beam
The Beam consists of two parts, the Receiver and Wireless Transmitter.
Transmitter
Receiver
Invisible Line Between Transmitter and Receiver
Toll Free US and Canada 1-877-847-7333
How To Video's