R.U.Ready Electronics Ltd. P.O. Box 22105 Cataraqui, Kingston Ontario K7M 8S5
Back to Products Home
Catalog and Price List
Contact Us
Support
Service
Western Barrel Racing Timer/Equestrian Clock

Features;

Portable, take it anywhere for practice.

Runs on only two 9 Volt Alkaline Batteries one in the Display and one in the Transmitter

(Optional 9/110 Volt Power Supply to attached to Display and Beam if power is available.

Set the Transmitter and Receiver with a gate of 3 Feet (1 Meter) to 150 Feet (45 Meters)

Easy to setup and align

Time can easily be seen from 50-75 Feet (15 Meters to 25 Meters) away.

Can be mounted on standard camera tripods
Infra Red Beam works in conjunction with our proven Display.

The Beam consists of two parts, the Receiver and Wireless Transmitter.

The Transmitter sends a narrow invisible Infra Red Beam to the Receiver on a continuous bases. Any interruption of the Beam between the Transmitter and Receiver sends a code to the Display that can be used to start or stop the Display program. The Receiver is plugged into the RJ9 Connector on the bottom of the Display with the 15-Meter (50 Feet) cable included. The remote transmitter is a wireless connection between the transmitter and receiver. Both the transmitter and receiver have standard tripod screw mounts for attachment to photo style tripods and both use individual 9 VDC alkaline batteries. The Receiver shares the power of the Display and can also be used in conjunction with the 110 Volt AC adapter.

Alignment between the Transmitter and Receiver is accomplished by first turning on the Transmitter and positioning it in a location from 1 to 45 Meters (3 to 150 Feet) from the Receiver. Plug the Beam into the RJ9 Connector located on the bottom of the Display and turn the main switch on the Display, to on. Point the Receiver at the Transmitter, when alignment is correct a red LED on the back of the Receiver will turn on solid indicating alignment.

No further setup is required.
Beam and the same entrance and exit for the event.
 
With the receiver and transmitter turned on and aligned as above. The Display will cycle, first displaying "rdy" on the Display and then "0.000". Passing between the Transmitter and Receiver will start the clock running. Passing through the Transmitter and Receiver will stop the clock running.

Write down your Time, wait 3 Seconds or longer and you are ready for the next Competitor.
Specification Four (4) Digit Display (Standard Display)

    Receives the Start and Stop signal from the Beams.
    Accurate to 1000's of a second when using a Four (4) Digit Display
    Displays time in 100's of a second
    Outside dimensions - 14 1/2 " x 6 3/4" x 1 5/8" (368mm x 171mm x 42mm)
    LCD Area - 13" x 4 5/8 " (330mm x 119mm) LCD Area - 13" x 4 5/8 " (330mm x 119mm)
    Large LCD numbers - 4" tall by 2" wide (100 mm x 50mm)
    Weight - 2 1/2 pounds (1.05K)
    Power: Standard 9 volt Alkaline DC battery or 110V power supply (Optional)
    Operation range: 10F-105F / -10C to 40C
    Time visible up to 75 feet (25 m) away
    Can be mounted on a standard camera tripod (not included).

Specification Six (6) Digit Display (Pro Version)

    Receives the Start and Stop signal from the Beams.
    Accurate to 1000's of a second when using a Six (6) Digit Display (Pro Version)
    Displays time in 1000's of a second
    Outside dimensions - 21 " x 6 3/4" x 1 5/8" (530mm x 171mm x 42mm)
    LCD Area - 19" x 4 5/8 " (430 mm x 119mm) LCD Area - 13" x 4 5/8 " (330mm x 119mm)
    Large LCD numbers - 4" tall by 2" wide (100mm x 50mm)
    Weight - 3 1/2 pounds (1.50 K)
    Power: Standard 9 volt Alkaline DC battery or Optional 110V power supply avaliable.
    Operation range: 10F-105F / -10C to 40C
    Time visible up to 75 feet (25 m) away
    Can be mounted on a standard camera tripod (not included).
Specification Beam (Transmitter and Receiver)

    Signals the Display to Start and Stop when an object breaks its Beam.
    Accurate to 1000's of a second
    Outside dimensions Receiver - 6 " x 2 3/4" x 1 1/4 " (152 mm x 950 mm x 320 mm)
    Weight Receiver -4 oz (115 Grams)
    Power Receiver : (Provided by Display through Cable from Display)

    Outside dimensions Transmitter - 5 1/4 " x 2 1/8 " x 1" (530mm x 550 mm x 250 mm)
    Weight Transmitter - 3 oz (85 Grams)
    Power Transmitter : Standard 9 volt Alkaline DC battery

    Distance between Receiver and Transmitter 3 - 120 feet (1-40 m)
    50 Foot (18 Meter) Receiver to Controller Cable Included
    Operation Temperture Range: 10F-105F / -10C to 40C

    Can be mounted on a standard camera tripod or light stands (not included).
Standard Version
Pro Version
The following are the features and uses of the Beam.
Standard Version
Pro Version
Beam
The Beam consists of two parts, the Receiver and WiredTransmitter.
Transmitter
Receiver
Invisible Line Between Transmitter and Receiver
Toll Free US and Canada 1-877-847-7333
rur015001.jpg
Click for Pictures
The Wired Barrel Racing Standard and Pro Versions have been Discontinued as of August 01 2014 and have been replaced with out Sport-Timer 3000 Wireless Systems.
Check out our Wireless Sport-Timer 3000 /Barrel Racing System